| Overheat / Fire Protection Panel |
Fire and Overheat System Tests
The fire and overheat detection systems can be tested by
pushing and holding the FAULT/INOP and OVHT/FIRE
TEST switch. The switch is spring loaded to the neutral
position.
All test indications clear when switch is released.
The fire and overheat detection systems can be tested by
pushing and holding the FAULT/INOP and OVHT/FIRE
TEST switch. The switch is spring loaded to the neutral
position.
All test indications clear when switch is released.
FAULT / INOP Test Position
The FAULT and APU DET INOP warning lights illuminate.
The MASTER CAUTION and OVHT/DET Annunciator
illuminate.
The FAULT and APU DET INOP warning lights illuminate.
The MASTER CAUTION and OVHT/DET Annunciator
illuminate.
